Teapot and Teacup diecut using Cricut Wall Decor Cartridge

     I used the Cricut Wall Decor cartridge to make these beautiful layered die cuts.  The largest Teapot and Teacup were cut at 4 inches, then the 2nd largest were cut at 3 and finally the smallest were cut at 2 inches.  It's difficult to tell here, but all these teacups and teapot diecuts were hand painted with a glitter concoction that I made and it really makes them sparkle!  I cut 3 layers, 2 in matching printed paper and 1 in pink solid paper.  I used the blackout feature for the pink and attached it to the printed paper on the bottom, then I used the other layer (printed paper) and attached some foam squares to give it some lift) and attached that layer to the top layer, creating a raised and layered die cut.